商品説明
Juniper Networks SSG 500M
高性能セキュリティゲートウェイ
動作確認済み、中古品です。
設定は、工場出荷時に初期化済みです。
商品詳細
メーカー:Juniper Networks
製品名:SSG 500M
Firewall性能:1Gbps/1Gbps（IMIX）*2
VPN性能:500Mbps
固定 I/O:10/100/1000BaseT x4/USBx2/コンソール
I/O スロット:6
ルート数:250,000
セキュリティゾーン数:60
バーチャルルータ数:15
VLAN数:150
外形寸法:8.89cm×44.45cm×54.61cm
重量:11.35kg(本体+電源x1）
安全規格:UL/CUL/CSA/CB
付属品
電源ケーブル
起動ログ
AMIBIOS(C)2003 American Megatrends, Inc.
BIOS Date: 08/29/06 17:46:44 Ver: 08.00.11
CPU : Intel(R) Pentium(R) 4 CPU 3.40GHz
Speed : 3.40 GHz
Press DEL to run Setup (F4 on Remote Keyboard)
Initializing USB Controllers .. Done.
1024MB OK
Auto-Detecting Pri Master..IDE Hard Disk
Pri Master: 256MB CHH Rev 1.00
Auto-detecting USB Mass Storage Devices ..
00 USB mass storage devices found and configured.
Checking NVRAM..
Booted because of undetermined RESET
Trying to boot from Primary Compact Flash ...
boot1...
w lba
boot2......
ScreenOS Saipanloader V1.0.3
Built Apr 18 2007/21:28:46
watchdog_probe, 1046 bus/dev/fn = 0/248 ich = 2640
boot_drive = 80
start1 = 2160, start2 = 10800
Hit 'X' and 'A' to upgrade bootloadermounting FAT16 partition
file size = 112
size = 112, sizeof(nvram_rec) = 112
Hit any key to load new firmware
Hit any key to load new firmware
Hit any key to load new firmware
Hit any key to load new firmware/$nsboot$.bin
file size = 10240000
hdr->magic_number = 81ba16ee, hdr->platform_type = 1700, hdr->cpu_type = 11
Ignore image authentication!
loading elf format....
＜0x4000000:0x48f5:0x0＞
move image from 1001020 -> 4000000, size = 18677
＜0x4005000:0x9ba000:0x50d8＞
move image from 1006020 -> 4005000, size = 10219736
real_entry_addr = 4000000, entry_addr = 4000000
Uncompressing Kernel...
Now booting the kernel
the system has been up for 0 second(s)
the system has been up for 0 second(s)
CPU:GenuineIntel
Version Information:
Extended Family ID = 0
Extended Model ID = 0
Family ID = f
Model = 4
Stepping ID = 1
Processor Type = 0
Brand String = 0
Additional Information:
Brand Index = 0
CLFLUSH Line Size = 64
Initial APIC ID = 0
Feature Information:
FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV
PAT PSE-36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS
HTT TM PBE
Extended Feature Information:
SSE3 MONITOR/MWAIT DS-CPL CNXT-ID
TLB/Cache Information:
1st-level data cache: 16 KByte, 8-way set associative, 64 byte line size
Data TLB: 4 KByte and 4 MByte pages, 64 entries
Instruction TLB: 4 KByte and 2-MByte or 4-MByte pages, 128 entries
Instruction TLB: 4 KByte Pages, 4-way set associative, 32 entries
2nd-level cache: 1 MByte, 8-way set associative, 64 byte line size, 2 lines per sector
Trace cache: 12 K-ooooop, 8-way set associative
No 2nd-level cache or, if processor contains a valid 2nd-level cache, no 3rd-level cache
3: eax = 0, ebx = 0, ecx = 0, edx = 0
4: eax = 121, ebx = 1c0003f, ecx = 1f, edx = 0
eax = 40, ebx = 40, ecx = 0, edx = 0
count = 80000008
Brand String: Intel(R) Pentium(R) 4 CPU 3.40GHz
L1 I Cache: 0K (0 bytes/line), D cache 0K (0 bytes/line)
L2 Cache: 1024K (64 bytes/line)
total DRAM size is 1048576 KB
init 0(+100000)
heap 100000(+2cf00000)
iocard 2d000000(+1400000)
packet 2e400000(+800000)
CTRL 2ec00000(+400000)
TASK 2f000000(+11000000)
heap_start = 1f76010, heap_size = 2b089ff0
RCBA = fed1c001
FD = f8ef1
MAP = 1
MAP = 1
bootmap_size = 8000
zone_table[ZONE_TASK].free_pages = 67574, zone_table[ZONE_TASK].num_pages = 69632
_fbss = 190e000, _end = 1f76000
data_start = f2c000, data_end = 190d000
Juniper Networks, Inc
SSG520/SSG550 System Software
Copyright, 1997-2006
Version 6.0.0r5.0
set_ecb_dcr: not implemented
scan pci 0 devices....
Device found on PCI bus 0:dev_num is 0,vendor id is 0x25888086
Device found on PCI bus 0:dev_num is 1,vendor id is 0x25898086
Device found on PCI bus 0:dev_num is 29,vendor id is 0x26588086
Device found on PCI bus 0:dev_num is 30,vendor id is 0x244e8086
Device found on PCI bus 0:dev_num is 31,vendor id is 0x26408086
scan pci 1 devices....
Device found on PCI bus 1:dev_num is 0,vendor id is 0x03298086
scan pci 2 devices....
Device found on PCI bus 2:dev_num is 2,vendor id is 0x90001148
Device found on PCI bus 2:dev_num is 3,vendor id is 0x90001148
cav_bar_init: called. Dump BARs PCI conf regs --
cav_bar_init: called. orig reg setting: PCI 10 = 0000e801, 18 = 0000e401
Load Manufacture Information ... init manufacture info Done
cfcard ready.
Install module init vectors
IO_CARD_BUF_START: 0x2d000000
ssg Searching GbE devices...
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 2
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 3
Total on-board GbE devices found 2
Total adapter GbE devices found 0
Install modules (00f2c000,0190d000) ...
load dns table : dns table file does not exist.
Initializing DI 1.1.0-ns
*********************************************************
System time: 22Nov2016:15:12:18
If this is the initial device startup,
use the "set clock" command to set the system clock.
*********************************************************
system init done..
Load NVRAM Information ... (6.0.0)Done
login: System change state to Active(1)
login: netscreen
password: (netscreen)
SSG550->
